Small excavator work points and common problems

Nov 4th,2024 792 Views

China is also known as the smallest excavator, the minimum micro excavator is 15 machines (1.5 tons); The definition of micro-excavators is not the same in the world, such as: in China, where excavators are popular (such as the United States, the Netherlands and Spain), 1 to 3 DWT is called a small excavator.

Small excavator leveling work points and common problems, the use of small excavator leveling the road is always advised not too difficult, said simple is not easy. Why is it so said, the first small excavator using De Lide small mining opportunity is much easier, at the same time, it is worth talking about high efficiency, and there is a small excavator leveling the road to grasp the following aspects of the way and work experience.

Key points of posture:

First, on the ground that is prepared for leveling in advance, first estimate the degree of both sides of the road, then select the elevation point from the high end of the road, level the ground successively to the end of the low-lying land, and finally dig up the soil above the elevation point, make up the area in the low-lying land, and estimate the leveling.

2. The small excavator drops the arm and opens the second arm to the arm intersection Angle of about 45 degrees; The bucket is opened, so that the mouth of the bucket and the two arms are basically level; The bucket falls into the road to collect the two arms, lift the arms, and pull the soil back; The equipment rotation is carried out one by one in order to level the ground.

Third, the final estimate of leveling, according to the actual landscape conditions harmonized control of the arm, the second arm and the bucket, the leveling work.

Key points and common problems of small excavator formation work, matters that must be noted:

First, the car should stand flat, if the excavator can not stand flat, the fairy has also been uneven

Second, the eyes should be alive, long-term according to the laminated glass to stare at the actual operation of the bucket flat, very easy to occur illusion and fatigue, so the eyes should often look at the flat road according to each Angle, you can find that the perspective is not the same, so that you feel different.

Third, select the surrounding reference, such as the already flat area, the tone of the soil layer, etc.

Fourth, there is the Angle of view of the bucket to maintain a fixed position, and the aspect ratio is accurately measured by the bucket and basic slope protection. There is also the condition of the excavator standing flat, close to the already smooth road surface, and the rotation is 180 degrees.

Believe in the equipment, do not believe too much in their eyes. Work for a long time vision fatigue, feel that of course there will be some errors, at this time, to fully believe in the accuracy of the equipment.

6. Often go backwards and observe the flat road from a different Angle. In the case of feeling similar after digging a piece, go backwards about a parking space as long, and then look at the front side of the excavation plan, it is relatively easy to see how much, it is its own specific exploration, especially for the working situation of the soil layer with deeper tones. ,

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

Method of cleaning excavator filter

Solve the problem of low oil pressure in the loader transmission

Company News

Industry dynamics

Small excavator work points and common problems

CONTACT US